Just a quick note to let you all know we're still alive.  Content will come as time allows.

Though we are a team of writers, each of us is also our own satellite - since we each have our own orbits in life.  The point is that we write when time allows, which means that when we do post something, you know we mean it.

For the love of Mutt!

I have been trying to see how much I can get done just using the terminal. I have my Debian partition on my PowerBook G4 running Awesome. It is a very lightweight tiling window manager. It does take some practice getting use to but once you have it set up, navigating around is not hard. One tool that I have just come to love is the mutt email client.

I have found very few lightwieght email clients that are really good. Slypheed comes the closest at least in my experience. Thunderbird can be really resource intensive, especially if you are processing a lot of email. This is where the power of mutt comes in. It is simply fast. I can read, reply, delete, and save messages much faster than a gui mail client. This means less of a load on my PowerBook. It also has gpg support so you can sign and encrypt your messages if needed. It really customizable, all your setting are on a config file. What I would like to do is give a walk through on how I have mutt configured and suggest some additional plugins that will enhance the experience.


If you do not have mutt installed in your system it is fairly simple.

apt-get install mutt mutt-patched

Set up and Configure

The package mutt will install the base application. The package mutt-patched install an add-on that allows you to have a sidebar for your folders. Once these install you will want to create a directory named .mutt. Here is where you will store your config files and directories. You can do most of this in one command.
mkdir -pv .mutt/{cache,certificates}

If you look in the /usr/share/doc/mutt/examples directory you will see some sample configuration files. The only one you really need to copy to .mutt/ is the gpg.rc file.

Now it is time to make our muttrc configuration file. I will be working under the assumption that gmail will be where the email is hosted.

The first thing you will want to do set up your credentials for imap and smtp. The imap credentials is what pulls down your emails and folders, whereas the smtp account allows mail to be sent through your provider's email system. Below is an example.

set realname = 'your name'
set from = 'your email'
set use_from = 'yes'
set envelope_from ='yes'
set imap_user = 'your gmail account'
set imap_pass = 'password'
set editor = vim
set smtp_url = 'smtp://your email account'
set smtp_pass = 'your password'
set ssl_starttls = yes
set ssl_force_tls = yes

I would strongly recommend that if you are using gmail to enable 2-step authentication and application specific passwords. The next thing you might want to do is define your remote folders specifically you inbox, drafts, and trash.

# Folders
set folder = 'imaps://'
set spoolfile = '+INBOX'
set postponed ='+[Gmail]/Drafts'
set trash = '+[Gmail]/Trash'

When you want to save a draft in mutt, it will ask if you want to postpone it. Mutt will then save to where you defined in the code above. Also it would be a good idea to define local cache as well. Below is an example.

# Local cache
set header_cache =~/.mutt/cache/headers
set message_cachedir =~/.mutt/cache/bodies
set certificate_file =~/.mutt/certificates

The next part is opitional and only needed if you want the sidebar and installed the mutt-patched package. If you did not you can still access your gmail folders by hitting 'c' then '?'. Below is what you will need to have the sidebar.

# Mailboxes to show in the sidebar.
mailboxes ="INBOX" ='[Gmail]/Drafts' ='[Gmail]/Sent Mail' ='label'
# Sidebar Patch --------------------------------------
set sidebar_delim = '│'
set sidebar_visible = yes
#set sidebar_width = 24
set sidebar_shortpath = yes
bind index CP sidebar-prev
bind index CN sidebar-next
bind index CO sidebar-open
macro index b 'toggle sidebar_visible'
macro pager b 'toggle sidebar_visible'
bind index B bounce-message

The first section defines the folders that will go into the sidebar, which gmail calls labels. Sublabels can also be added by using ='label/sublabel'. The second portion defines the look of the sidebar and the last portion defines the navigation shortcuts. Finally to enable gpg support do the following.

# GNUPG Config
source /home/user/.mutt/gpg.rc
set pgp_autosign = yes
# set pgp_replysignencrypt = yes
# set pgp_veryfy_sig = yes
set pgp_sign_as = gpg pub key

This will give a basic mutt interface with sidebar and gpg enabled. Now I want to share two addons that will really help enhance your experience in mutt.


Goobook is a simple utility that allows you to manage you gmail contacts from inside mutt. When it is time to compose a message just hit tab in the 'to:' field or just the begining of the name you want and hit tab. Goobook will present you a list of email addresses to choose from. The install of the package is pretty simple.

apt-get install goobook

Then create a .goobookrc file and add the following.

email: gmail account
password: password

Then run the command goobook authenticate to have gmail verify the tool has rights to manage you contacts. After you have authorized goobook then add the following to the muttrc file.

# Address book using goobook
set query_command="goobook query %s"
macro index,pager a "goobook add" "add sender to google contacts"
bind editor complete-query


This tool gives you the ability to open urls in messages with an external browser (ie luakit or w3m). The install is the same as the others.

apt-get install urlview

The config file is .urlview. Below is my setup.

# Sample urlview(1) configuration file

# regular expression to use to match URLs
REGEXP (((http|https|ftp|gopher)|mailto):(//)?[^ <>"\t]*|(www|ftp)[0-9]?\.[-a-z0-9.]+)[^ .,;\t\n\r<">\):]?[^, <>"\t]*[^ .,;\t\n\r<">\):]

# command to invoke for selected URL
# COMMAND /etc/urlview/
COMMAND luakit %s

# set to yes to enable menu wrapping

The key portion is here COMMAND luakit %s. Luakit can be replaced with any browser desired. Finally just add the following section to the muttrc file.

# View URLs inside Mutt
macro index \cb "|urlview\n"
macro pager \cb "|urlview\n"

When a message is opened hit CTRL+b and you will be given a list of urls to open. Just select one and the browser will open.

I hope this tutorial is helpful. I have my entire muttrc file hosted on github if anyone wants to see what I have set up. If you are for looking a fast flexable email client that will not slow down your PowerPC machine then I would seriously consider giving mutt a try.

Looming on the horizon

This is likely at least 3-4 years away, but h.264 is on its way out, now that h.265 (HEVC) has been adopted by more and more people.  Just as XviD was dropped by most in 2012, the same fate is inevitable for h.264 within a few years.

There are two key issues that keep h.265 off PowerPC:

1. Playback - there are currently no available playback applications capable of playing the h.265 codec that would work on Mac OS PowerPC.  VLC started supporting it in version 2.1.12, but this is irrelevant, since most h.265 is 2160p, and out of the range of even a quad G5.  There is some 720p h.265 floating around that a quad could likely play if there was a playback option.

2. Encoding - and this is the bigger need, as there are also no Mac OS PowerPC encoding software capable of reading h.265 to transcode it to something else.  Since most PowerPC hardware wouldn't be able to play most h.265 anyway, the best need to fill for us is to get an encoding app on PowerPC that can transcode h.265 to h.264 or XviD/DivX.

So we need a Mac developer to port a newer version of Handbrake (or any other equally capable encoder) to Tiger and Leopard PowerPC.

There is no point in wasting time on a player, as I already mentioned, since 90% of these files will not play on even a quad G5.

Even a Linux solution would work, but one for Mac OS would be a much broader brush stroke. 

I wanted to bring this up long before it became a dire need.


CorePlayer details

I have received numerous questions regarding the method of the CorePlayer crack. Now I would like to briefly describe the process.

PPC Reverse engineering on Mac OS can be an easy process if we know how to do it. There are several debugging and disassembler tools available for Mac OS that can be used for such purposes.  In this case I only used OTX v.16b disassembler and a simple hex editor 0xEd.

For me the easiest way is to look into the code itself produced by OTX. It is a simple GUI application and produces a text file of the application that we want to disassemble. The CorePlayer binary itself is only 5 MB but the text output produced by OTX is nearly 21 MB.

A part of the output looks like this:

  +188    0006e23c  409e0064    bne         cr7,0x6e2a0
  +192    0006e240  813f0000    lwz         r9,0x0(r31)
  +196    0006e244  a161003e    lhz         r11,0x3e(r1)
  +200    0006e248  80490000    lwz         r2,0x0(r9)
  +204    0006e24c  a0020074    lhz         r0,0x74(r2)
  +208    0006e250  7f8b0000    cmpw     cr7,r11,r0
  +212    0006e254  40be004c    bne+         cr7,0x6e2a0
  +216    0006e258  a0010040    lhz         r0,0x40(r1)
  +220    0006e25c  2f800001     cmpwi     cr7,r0,0x1
  +224    0006e260  40be0040    bne+         cr7,0x6e2a0
  +228    0006e264  80010044    lwz         r0,0x44(r1)
  +232    0006e268  80410038    lwz         r2,0x38(r1)
  +236    0006e26c  7f801000     cmpw     cr7,r0,r2
  +240    0006e270  419e0030    beq         cr7,0x6e2a0
  +244    0006e274  a0010042    lhz         r0,0x42(r1)
  +248    0006e278  805f00dc     lwz         r2,0xdc(r31)
  +252    0006e27c  5409073e    rlwinm     r9,r0,0,28,31
  +256    0006e280  7f824800    cmpw     cr7,r2,r9
  +260    0006e284  419e0034    beq         cr7,0x6e2b8
  +264    0006e288  3802ffff       addi         r0,r2,0xffff
  +268    0006e28c  2b800002    cmplwi     cr7,r0,0x2
  +272    0006e290  419d0010    bgt         cr7,0x6e2a0
  +276    0006e294  3809ffff       addi         r0,r9,0xffff
  +280    0006e298  2b800002    cmplwi     cr7,r0,0x2

Each line is one operation in the code. I do not want to go into details now of assembly coding. There are dozens of good sites dealing with programming.

So a very plain explanation of a line:

+240        0006e270  419e0030    beq         cr7,0x6e2a0

+240                               reference line number within a program block
0006e270                        overall line number
419e0030                        machine hex code
beq    cr7,0x6e2a0          assembly code

The registration of CorePlayer is linked to the unique Mac serial number of a particular machine where the player is installed. 

In the output of OTX we have to find the appropriate places where the software checks the registration status and decides whether it will run or not. CorePlayer uses a 3 level verification process:

1. is there a valid serial number entered and stored in the Users/user/.CorePlayer/config.xml file,
2. is there a valid user based on the Mac serial number and CorePlayer serial number to run the program and start the GUI,
3. is there a valid user based on the Mac serial number and CorePlayer serial number to start video playback.

As I had the valid CorePlayer serial numbers from the start I only had to find the places in the code where the Mac and CorePlayer serial number checks were executed. This is the hardest part but if someone has some experience in assembly language then it is relatively easy to find these places in the code. In this case for me the starting point was the place where the registration dialog is called:

 +1176    000139b0  7f801000    cmpw     cr7,r0,r2
 +1180    000139b4  409e0030    bne         cr7,0x139e4
 +1184    000139b8  a001005a    lhz         r0,0x5a(r1)
 +1188    000139bc  805d00dc    lwz         r2,0xdc(r29)
 +1192    000139c0  5409073e    rlwinm     r9,r0,0,28,31
 +1196    000139c4  7f824800    cmpw     cr7,r2,r9
 +1200    000139c8  419e00c0    beq         cr7,0x13a88
 +1204    000139cc  3802ffff       addi     r0,r2,0xffff
 +1208    000139d0  2b800002    cmplwi     cr7,r0,0x2
 +1212    000139d4  419d0010    bgt         cr7,0x139e4
 +1216    000139d8  3809ffff       addi     r0,r9,0xffff
 +1220    000139dc  2b800002    cmplwi     cr7,r0,0x2
 +1224    000139e0  409d00a8    ble         cr7,0x13a88
 +1228    000139e4  807e0044    lwz         r3,0x44(r30)
 +1232    000139e8  3ca05549    lis         r5,0x5549
 +1236    000139ec  3c80001f     lis         r4,0x1f
 +1240    000139f0  38c00000     li         r6,0x0
 +1244    000139f4  38845f94     addi     r4,r4,0x5f94      serialdialog
 +1248    000139f8  60a54744     ori         r5,r5,0x4744      'UIGD'
 +1252    000139fc  481556e5     bl         0x1690e0
 +1256    00013a00  7c7f1b79     or.         r31,r3,r3
 +1260    00013a04  4082001c    bne         0x13a20
 +1264    00013a08  48000068    b         0x13a70
 +1268    00013a0c  7fc3f378      or         r3,r30,r30
 +1272    00013a10  38800000    li         r4,0x0
 +1276    00013a14  38a0020c    li         r5,0x20c
 +1280    00013a18  4bfff879      bl         0x13290
 +1284    00013a1c  4800006c    b         0x13a88
 +1288    00013a20  3c400001    lis         r2,0x1
 +1292    00013a24  93c10058    stw         r30,0x58(r1)
 +1296    00013a28  38800217    li         r4,0x217
 +1300    00013a2c  38a10054    addi     r5,r1,0x54
 +1304    00013a30  38423290    addi     r2,r2,0x3290

If we do not want to call the registration dialog then we have to tell the program to jump over the registration call. So the actual place that we have to alter is before the dialog call:

+1180    000139b4  409e0030    bne         cr7,0x139e4

I have found 6 places where these or very similar verifications were executed and called. The basic pattern of the code looks like this:

  +240    0006e270  409e0030    bne         cr7,0x6e2a0
  +244    0006e274  a0010042    lhz         r0,0x42(r1)
  +248    0006e278  805f00dc     lwz         r2,0xdc(r31)
  +252    0006e27c  5409073e    rlwinm     r9,r0,0,28,31
  +256    0006e280  7f824800    cmpw     cr7,r2,r9

The easiest way is to alter the program flow and negate the relevant operations. In this way it skips the appropriate parts and will accept any Mac serial numbers and a valid CorePlayer serial number. In order to negate the operation we have to change the  line:

0006e270 409e0030        bne         cr7,0x6e2a0


0006e270 419e0030        beq         cr7,0x6e2a0

We have to use the hex editor to change the code at 6 different places in the binary and save the altered code. After this entering a valid serial will produce a fully working CorePlayer.

If someone wants to dive deeply into this topic I would recommend starting with this site:

CorePlayer file association icons

Now that CorePlayer has been in the wild for a few weeks, I'm sure you have noticed that its file association icon is the default blank one, which has no personality at all.

Well, an app this efficient deserves to have better than a blank file association icon, and thanks to Adam Albrec, the maker of PPC Media Center, it now has two custom icons.



Here is the readme file contents, for your convenience.  You need the first icon .dmg for the .plist file, even if only using the second.  If only interested in the first one, then you don't need the second.

Copy the cpDocument.icns file to the Resources folder within the CorePlayer package contents.

Then copy the new Info.plist to the Contents folder within CorePlayer.

Next copy CorePlayer to a new location and then back to re-initialize it.

When you restart, or relaunch Finder, all documents assigned to use CorePlayer will now have the custom icon.

If you wish to make your own icon, feel free and just give it the same file name as above and install as directed.

Feel free to leave any comments for Adam here.

Thanks again, Adam!

New admin

In the spirit of this blog always growing and staying around, I have decided we needed another admin here, and Mark (fiftysixk) is the natural choice as the longest member of the team after me, and the guy works for freaking NASA.  Do I really need to say more?  I didn't think so...

Life is a delicate thing, and if anything ever happened to me I want another admin around to take care of the place.  Mark is that guy.

Mark is at the exact same level of power and control that I am, and by Blogger's guidelines and rules, this also makes him a part-owner of the blog now.  He deserves it for his dedication.

So please join me in welcoming the new admin to his new role here.